Application for Admission into the Nigerian Defence Academy 75 Regular Course

THOMAS NDYAR GUMA

  • Home
  • THOMAS NDYAR GUMA
Thomas Ndyar Guma

Thomas Ndyar Guma

Senior Lecturer
Department of Mechanical Engineering

Email:tnguma@nda.edu.ng

Phone No.:  +2348068747385

PERSONAL DETAILS

Name: Thomas Ndyar GUMA

Email: tnguma@nda.edu.ng

Phone No. +2348068747385

QUALIFICATIONS

B.Eng, M.Sc, Ph.D (Mechanical Engineering), MNSE, R.COREN

ACADEMIC PRIZES WON

  1. First Position prizes in 13 out of 16 terminal Examinations at St Paul R.CM. Primary School Ashamena, Kusuv.
  2. Overall best student in Mathematics, Additional Mathematics and Chemistry, Government College, Katsina-Ala, 1979
  3. Overall best Student in Mathematics, Physics and Chemistry, School of Basic Studies Ugbokolo, 1981
  4. West African Portland Cement Company Prize for the best Mechanical Engineering Student in Thermodynamics, ABU, Zaria, 1985
  5. PZ group prize for the best final year student in the subject Engineering Manufacture over two years of study at ABU, Zaria, 1985
  6. Dean Faculty of Engineering, Nigerian Defence Academy Prize for Engineering Lecturer with the highest number of publications in 2012/2013 Academic Year

SCHOLARSHIPS

  1. Benue State Undergraduate and Postgraduate Scholarships. 1981  1985 and 1988 1990
  2. Federal Government of Nigeria Postgraduate Scholarship. 1988 1990

AREAS OF RESEARCH INTEREST

Specializes in Production in Engineering with the following areas of research interest:

  1. Strength of materials.
  2. Materials and Corrosion Engineering.
  3. Control Theory.
  4. Manufacturing Processes.
  5. Manufacturing Automation.
  6. Applied Mechanics and Vibration
  7. Engineering Mathematics.

THESES AND DISSERTATION PRODUCED

  1. Approximate Methods in Application to a Problem of Torsion. B.Eng Research Project, Department of Mechanical Engineering, ABU, Zaria.
  2. Non-circular Boring on the Lathe Using Chain Drive for Power Transmission. M.Sc Thesis Production Engineering, Department of Mechanical Engineering, ABU, Zaria.
  3. Effects of Some Bitumen Coating Treatments on Corrosion and Mechanical Behavior of Low Carbon Steel. Ph.D Dissertation, Department of Mechanical Engineering, ABU, Zaria,

PUBLISHED JOURNAL PAPERS

  1. N. Guma: Development of a Feasible Method of Drilling Deep Gun Holes on the Engine Lathe. Academy Journal of Science and Engineering, 3(1), 2004. Faculty of Science & Engineering, Nigerian Defence Academy, Kaduna, Nigeria, ISBN 978-35139-2-12 pp 66-81.
  2. LT Tuleun, TN Guma: Development of a Non-circular Boring Attachment for the Lathe. Ife Journal of Technology, 15(1), 2006. Faculty of Technology, Obafemi Awolowo University, Ile Ife, pp.51-62.
  3. LT Tuleun, TN Guma: Experimental Force Analysis of a Non-circular Boring Attachment. The Nigerian Journal of Research and Production, 11(1), 2007. Nigerian Researchers Forum, Enugu State University of Science and Technology, Enugu, ISSN 1596-6615, pp. 38-50.
  4. N. Guma: Methods of Improving the Lives and Quality of Hoes Used by Nigerian Farmers. Nigerian Journal of Engineering Management (NJEM), ISSN 1595-3610, Department of Mechanical Engineering, FUT Akure, 10(1), 2009, pp. 27-35. Besade Publishing Press Ondo in Association with Nigerian Institution of Engineering Management (NIEM).
  5. N. Guma: Experimental Study of a Problem of Torsion. New Era Research Journal of Engineering Science and Technology (NERJEST), 2(2), 2009. De-Caritas Centre for Studies on Human Development in Africa; Rivers State University of Education, Port-Harcourt, Nigeria. ISSN 1599-8738, pp. 10-17.
  6. N. Guma, P.B Madakson, D.S. Yawas, S.Y. Aku: Assessment of Physicochemical Properties of some Bitumen from Nigerian Resources. Nigerian Journal of Basic and Applied Sciences, 20 (1 & 2), 2012. Usmanu Danfodio University Sokoto. Available online at: www.ajol.info>njbas .
  7. N. Guma, P.B Madakson, D.S. Yawas, S.Y. Aku: An Experimental Account for Variation in Levels of Corrosion Coat-Inhibition Performances among Bitumen. Multidisciplinary Journal of Academic Excellence 9(1), 2013. National Association for Advancement of Knowledge (NAFAK), University of Nigeria Nsukka, ISSN 2141-3215 pp.71-85.
  8. Guma, T.N. and Ishaya, D.D. Pull off Adhesive Bond Strength Assessments of some Corrosion-Protective Bitumen Coatings on Low Carbon Steel Plates. Nigerian Journal of Engineering Science Research (NIJESR), Igbinedion University, Okada, Edo State, Nigeria, Vol. 2, Issue 2, 2019, pp.01-14. Available online at: http://www.iuokada.edu.ng/journals/nijesr/wp-content/uploads/2020/01/Pull-off-Adhesive-Bond.
  9. Guma, T.N. & Ajayi, E.O. Effects of Tempering and Normalizing Heat Treatments on Stress Corrosion Cracking Behaviors of Modified AISI 4340 (300M) Steel in Acidic Chloride Media. Nigerian Research Journal of Engineering and Environmental Sciences, University of Benin, Vol. 4 No.2 2019, pp. 604-616. Available online at rjees.com
  10. N. Guma, K.V. Odita, N.C.A. Ozoekwe, & T. Akor (2019). Analysis of Shell Failure of a Semi-Trailer Tanker Used for Hauling Petroleum Products. Nigerian Institution of Professional Engineers and Scientists , Department of Mechanical Engineering, University of Benin. Journal of Science and Technology Research, 1(3), pp. 144-160. Available online at: https://nipesjournals.org.ng
  11. T. Tuleun, T.N. Guma: Analysis of Vibrations of a Non-circular Boring Attachment on the Lathe. Nigerian Journal of Engineering Research and Development (NJERD), ISSN 1596-471X, Department of Mechanical Engineering, FUT, Akure,  5(4), 2006. Besade Publishing Press Ondo in Association with Nigerian Institution of Engineering Management (NIEM), pp. 33-42.
  12. N. Guma, P.B Madakson, D.S. Yawas, S.Y. Aku: Effects of Some Bitumen Coating Treatments on the Hardness Corrosion of Low Carbon Steel. International Research Journal on Engineering Science and Technology, Department of Materials and Metallurgical Engineering, FUT, Owerri,7(1), 2010. Edna Ben Publishers Owerri in Association with Glosco Technological Services. ISSN 1597-5258,pp.56-64.
  13. N. Guma: Theoretical Analysis of Control and Stability of Military Vehicle Dynamics in Field Terrains under Hydro gas Passive Suspension. Nigerian Journal of Engineering Research and Development (NJERD), ISSN 1596-471X, Department of Mechanical Engineering, FUT, Akure. 8(4), 2009. Besade Publishing Press Ondo in Association with Nigerian Institution of Engineering Management (NIEM).
  14. N. Guma: Strength Characteristics of Aluminum to Aluminum Wires Bonded with Epoxy Adhesives. Journal of Engineering Technology and Industrial Applications, 1(3), 2001. Crosxings International Publishers, Kaduna, Nigeria, 1SSN 1118-8385, pp. 88-91
  15. N. Guma: Surface Finish Analysis of Non-circular Bores Produced on the Lathe Using a Servo-controlled Attachment. International Journal of Science and Technological Research, 6(1&2), 2009. Development Universal Consortia, Ikot Ekpene, Nigeria, ISSN 0331-8737, pp. 94-106.
  16. N. Guma: Application of Finite Difference Method to Solution of a Problem of Torsion. International Journal of Engineering Science, 3(1), 2009. Pan African Book Company Accra, Ghana, pp. 17-25.
  17. T. Tuleun, T.N. Guma: Performance Characteristics of a Developed Non- Circular Boring Attachment. Discovery and Innovation (AJOL), Vol 21, No. 1-2 (2009). Available online at: www. Ajol.info
  18. N. Guma and P.A. Kulawe: Controlling Industrial Noise-A Case Study of Nigerian Breweries Kaduna. African Journal of Engineering Research and Development 3 (4), 2010. Devon Science Nsukka, Nigeria. ISSN-2141-0089, pp. 150-153.
  19. N. Guma: Effect of Illo Clay and Corn Flour Additives on the Foundry Properties of Kaduna River Sand in Nigeria. Journal of Chemical Mechanical and Engineering Practice, International Perspective 1(2&3), 2010. International Centre for Integrated Development Research (ICIDR), IkotEkpene, Nigeria, Available online at: www.icidr.org
  20. N. Guma: Applicable Technique for Dimensional and form Accuracy of Non-circular Bores Produced on the Lathe Using a Servo-controlled Attachment. Journal of Science and Technology Research, 9(2), 2010. International Research and Development Institute (IRDI), Uyo, Nigeria. ISSN 1596-9649, pp. 71-75
  21. N. Guma, P.B Madakson, D.S. Yawas, S.Y. Aku: Assessment of Capability Levels of Bitumen from Some Nigerian Sources to Coat-inhibit Impact Strength Corrosion of Low Carbon Steel. International Journal of Mechanical Engineering, 3(1), 2011, Blackwell Publications, Lagos, pp. 63-70.
  22. N. Guma & C.I.C Oguchi: Field Test Assessment of Corrosivity of River Kaduna to Mild Steel. PeCop Journal of Science, Engineering & Technology 4(1&2), 2011, PeCop Academia Press, Nigeria Ltd, ISSN 2006-0084, pp. 40-50 Available online at: www.pecopprenil.org
  23. N. Guma, P.B Madakson, D.S. Yawas, S.Y. Aku: Assessment of Capability Levels of Bitumen from Some Nigerian Sources to Coat-inhibit Tensile Strength Corrosion of Low Carbon Steel. International Journal of Engineering Science, 3(1), 2011. Pan African Book Company, Accra Ghana.
  24. N. Guma & G. Mbaka: A comparative Study of the Design and Characteristic Performances of DICON Made Guns in Nigeria. Journal of Innovative Research in Engineering and Sciences, 2(6), 2011. Available online at: www.grpjournal.org
  25. N. Guma: Characteristic Foundry Properties of Kaduna River Sand. Research Inventy, International Journal of Engineering and Science, 1(11), 2012. Available online at: www.researcyinventy.com
  26. N. Guma, P.B Madakson, D.S. Yawas, S.Y. Aku: Sodium Benzoate and Bitumen Coatings as Inhibitors of Corrosion Deterioration of Mechanical Properties of Low Carbon Steel. Journal of Chemical Mechanical and Engineering Practice, International Perspective 2(3), 2012. International Centre for Integrated Development Research (ICIDR), IkotEkpene, Availabe online at: www.icidr.org
  27. N. Guma, P.B Madakson, D.S. Yawas, S.Y. Aku: X-ray Diffraction Analysis of the Microscopies of some Corrosion-Protective Bitumen Coatings, International Journal of Modern Engineering Research (IJMER) 2(6), 2012. Available online at: www.ijmer.com
  28. N. Guma, P.B Madakson, D.S. Yawas, S.Y. Aku: Effects of Some Bitumen Coating Treatments on the Corrosion Fatigue Strength of Low Carbon Steel Plates. Research Desk International-An International Journal of Science and Technology 2(1), 2013, Available online at: www.researchdesk.net
  29. N. Guma, P.B Madakson, D.S. Yawas, S.Y. Aku: Characterization of the Working Thicknesses of Some Bath-Dip-Produced Corrosion-Protective Bitumen Coatings on Polish-Prepared Low Carbon Steel Specimens. International Journal of Engineering Research and Development 6(12), 2013, Available online at: www.ijerd.com
  30. N. Guma: Development of Applicable Armor from Low Carbon Steel Plates through Pack Carburization Process against Some Fired Projectiles. International Journal of Research and Advancement in Engineering Science 3(3), 2013. Centre for Advanced Training and Research Buea Cameroon. ISSN 2276-8149, pp. 1-7.
  31. Guma Ndyar Thoms & Mbaka Gambo (Book): An Exploration of Small Arms Development and Characteristic Performances of DICON-made Types in Nigeria, Lambert Academic Publishing House, 2013. Germany. Available online at:http:www.lap-publishing.com
  32. N. Guma, WC. Solomon & HL Sambo: Assessment of Stress Corrosion Cracking Susceptibilities (SCC) of some Outokumpu-Produced Stainless Steel in a River Harbour Mud Using Accelerated Test. International Journal of Engineering Sciences and Research Technology (IJESRT), 3(11) 2014.  Available online at: www.ijesrt.com
  33. N. Guma, & A. Amadi: An Empirical Overview and Prognosis of Fatigue Failure Alleviation of Flight Vehicle Structures. Journal of Engineering Resarch and Design 2(2), 2014, Malaysia. Available online at: http://oaji.net/journal-detail.html?number=1103
  34. N. Guma, D.K. Garba, H. Adulazeez: Corrosion Monitoring of Automobile Engines-A Case Study of Mercedes Benz 200 C-Class. International Journal of Science and Advanced Technology 4(7), 2014. Available online at http://olddrji.lbp.world/JournalProfile.aspx?jid=2304-652X
  35. N. Guma, S.Y. Aku, D.S. Yawas, and M. Dauda: An Overview Assessment of Various Surveyed Corrosion Protection Approaches for Steel. International Organization of Scientific Research (IOSR) Journal of Engineering 4(11), 2014. Available at: http://iosrjen.org/pages/volume4-issue11(part-3).html
  36. N. Guma, S.Y. Aku, D.S. Yawas, and M. Dauda: Effects of Environmental and Metallurgical Factors on Corrosion of Steel. International Journal of Innovative Research in Advanced Engineering, 1(11), 2014, pp94-105. Available online at: https://www.ijirae.com/volumes/vol1/issue11/17.NVME10101.pdf
  37. N. Guma, S.Y. Aku, D.S. Yawas, and M. Dauda: Experimental Assessment of Bitumen Coat-Resistance to Impact Strength Corrosion Deterioration of Low Carbon Steel Using Shewart Charts. The international Journal of Engineering and Science, 3(8) 2014, pp.2 Available online at: http://www.theijes.com/papers/v3-i8/Version-3/E0383027034.pdf
  38. N. Guma, S.Y. Aku, D.S. Yawas, and M. Dauda: Gas Chromatography Elemental Analysis of Some Corrosion-Coat-Protective Bitumen from Nigerian Resources. Journal of Multidisciplinary Engineering Science and Technology 1(4) 2014. Berlin, Germany. Available online at: https://www.semanticscholar.org/paper/Gas-chromatography-elemental-analysis
  39. N. Guma, S.Y. Aku, D.S. Yawas, and M. Dauda: Dispersion Analysis of Corrosion Coat-protection Levels of Mechanical Properties of Low carbon Steel, Journal of Emerging Trends in Engineering and Applied Sciences, 5(5) 2014. Scholarlink Research Institute Manchester UK. ISSN 2141-7016, pp.300-304.
  40. N. Guma, S.U. Mohammed, & A.J. Tanimu: A Field survey of Soil corrosivity level of Kaduna metropolitan area through Electrical Resistivity Method. International Journal of Scientific Engineering and Research (IJSER), 3(12), 2015. Available online at: https://www.ijser.in/archives/v3i12/81115011.pdf
  41. N. Guma, S.Y. Aku, D.S. Yawas, & M. Dauda: Bitumen in Coating Corrosion Protection of Steel-The Position and Prognosis of Nigerian Bitumen. American Journal of Engineering Research (AJER), 4(12), 2015. Available online at: www.ajer.org
  42. N. Guma, S.U. Mohammed, & A.J. Tanimu: An Experimental Investigation of Galvanic Anode Specifications for Suitable Cathodic Corrosion Protection of Low Carbon Steel in Kaduna metropolitan Soil. American Journal of Engineering Research, 5(2), 2016. Available online at: www.ajer.org.
  43. N. Guma,& C. Allison: Experimental Stress Analysis of Adhesively Bonded Joints. International Journal of Science and Research (IJSR), 6(9), 2017. Available online at:https://pdfs.semanticscholar.org/4556/6319194a0be1f493a99e8a864a44b329e802.pdf
  44. T.N. Guma, Atiku Salisu Ahmed, & Abdulkareem Abdullahi Abubakar: Corrosion Management and Control-Entrepreneurial Opportunities and Challenges in Nigeria. International Journal of Research and Applications (IJERA), 7(10), 2017, pp.14-23 Available online at:http://www.ijera.com/papers/Vol7_issue10/Part-6/C0710061423.pdf
  45. N. Guma & Anthony Agbata: Design of A Mechanical Agitator for Supplementing Paint Mixing with Standard Facilities. International Journal of Engineering Research and Technology, Volume 07, Issue 11, 2018. Available online at: https://www.ijert.org/design-of-a-mechanical-agitator-for-supplementing-paint-mixing-with-standard-facilities
  46. N. Guma & Ajayi Eunice Olukemi: Corrosion Management and Control in the Petroleum Industry-A Case Study of Practicalities at Kaduna Refinery. IOSR Journal of Mechanical and Civil Engineering, Volume 15, Issue 4 (July-August), 2018. Available online at: www.iosrjournal.org.
  47. N. Guma & James Abu: A Field Survey of Outdoor Atmospheric Corrosion Rates of Mild Steel around Kaduna Metropolis. SSRG International Journal of Mechanical Engineering, Volume 5, Issue 11, 2018. Available online at http://www.internationaljournalssrg.org/IJME/paper-details?Id=45
  48. N. Guma and Lilian Ogboi Uche: Sand Mould Design for Casting an Aluminium Pot-A Basic Procedure of Supplementing Artisanal Practices. European Journal of Engineering Research and Science (EJERS), Vol. 4, No. 4, April, 2018. Available online at: https://www.ejers.org/index.php/ejers/article/view/1188
  49. N. Guma& Anthony Agbata: Simulation Integrity Test of a Designed Mechanical Agitator for Supplementing Paint Mixing with Standard Facilities. International Research Journal of Engineering and Technology (IRJET), Volume: 05, Issue 12, December 2018. Available online at: www.irjet.net
  50. N. Guma, Anthony Agbata, & T. Akor: An Overview of Basic Concepts and Research Advancements in Design of Mechanical Agitators for Paint Mixing. Saudi Journal of Engineering Research, Scholars Middle East Publishers, Dubai. Vol 4(1), January, 2019. Available online at: http://scholarsmepub.com/sjeat-41/
  51. N. Guma and Jahleel. A. Durami: Assessment of Alkaline Food Environment Corrosion with some Menus at a Cadet Mess on the Tensile Strength of Aluminum 6063 Alloy. International Journal for Research in Applied Science & Engineering Technology (IJRASET), Volume 7, Issue 1, January, 2019, pp. 621-630. Available online at: https://www.ijraset.com/archive-detail.php?AID=83
  52. N. Guma, AbdulhakeemAbdullahi and J.O. Akindapo: Physicochemical Properties of Modified Kaduna Refinery Bitumen with Bamboo and Rosewood Fibers. European Journal of Engineering and Technology, Volume 7, No. 1, 2019,. Available online at: http://www.idpublications.org/european-journal-of-engineering-and-technology/
  53. N. Guma, Abdulhakeem Abdullahi, and Atiku Salisu Ahmed: Bamboo and Rosewood Fibres-Modified Bitumen Evaluation for Carbon Steel Corrosion Coat-Inhibition in Acidic Chloride Media. SSRG International Journal of Mechanical Engineering 6(3), 2019), pp. 14-20. Available at: https://www.researchgate.net
  54. N. Guma, O. Olayiwola, and D.K. Garba. Effects of Some Heat Treatments on Corrosion of Low and Medium Carbon Steel in Acidic Chloride Medium. World Scientific News 132 (2019), pp. 169-186, Available online at: http://www.worldscientificnews.com
  55. N. Guma and S.A. Sukuntuni. Effects of Acidic Food Environment Corrosion on Impact Strength of Aluminum 6061 Alloy: A Case Study with some Menus at a Cadets’ Mess. International Journal of Engineering Trends and Technology Vol 67 Issue 7, No. 3., 2019. Available online at: https://www.ijettjournal.org/Volume-67/Issue-7/IJETT-V67I7P214.pdf
  56. N. Guma and K.O. Daniel. Effects of some Amine Treatments on Corrosion of Mild Steel in Acidic Chloride Environment. International Journal of Emerging Technology and Advanced Engineering. Volume 9, Issue 8, 2019, pp. 39-49. Available online at: https://ijetae.com/Volume9Issue8.html
  57. N. Guma, OgboiLilianUche. A Typification of Foundry Practices for Correct Artisanal Sand Casting of Aluminum Pots. International Journal of Engineering Sciences and Applied Technology, 4(4), 2019, pp. 169-178. Available online at: https://www.ijeast.com/papers/169-178,Tesma404,IJEAST.pdf
  58. N. Guma, E.O. Ajayi  & M.H. Mohammed. (2020). Standard Techniques of Stress Corrosion Cracking Testing: A Review. Journal of Newviews in Engineering and Technology (JNET), Rivers State University, Port-Harcourt 2(1), 58-72. Available online at: http://www.rsujnet
  59. Guma, T.N. &Abubakar A.A. (2020). Analysis of Steel-Corrosive Chemical Species in Nigerian Defence Academy Soil in Kaduna Metropolis Using X-Ray Fluorescence and Diffraction Techniques. Uniport Journal of Engineering and Scientific Research (UJESR). Vol. 5, Special Issue, 2020, pp.140-147. Available online at: http://www.ujesr.org/index.php/about/about-ujesr
  60. N. Guma, E.O. Ajayi, & M.H. Mohammed (2020).An Overview of Practicability and Application of 300M Steel in the Face of Stress Corrosion Cracking Issue. Journal of Science and Technology Research, 2(3). Nigerian Institution of Professional Engineers and Scientists. Available online at https://nipesjournals.org.ng/
  61. N. Guma & C.O. Amadi (2020). Machining Bevel Gears on the Lathe:A Feasibility Exploration. European Modern Studies Journal, Vol. 4(5). Available online at: http://journal-ems.com/
  62. Guma T.N. & Odita, K.V. Basic Awareness on Semi-Trailers as Heavy-Duty Freight Road Vehicles and their Uses in Nigerian Economy: A Review. Journal of Science Technology and Education, Abubakar Tafawa Balewa University, Bauchi 8(3), pp.328-345, September, 2020. Available online at: https://www.atbuftejoste.com/index.php/joste/article/view/1006
  63. N.Guma, N.C.A Ozoekwe & Odita, K.V. An Overview of Approaches and Techniques used in Failure Analysis of Engineering System. Arid Zone Journal of Engineering, Technology and Environment published by University of Maiduguri, Vol 16, No. 3, 2020. Available online at: https://www.azojete.com.ng/index.php/azojete/article/view/343
  64. Thomas Ndyar Guma, & Habeeb Alabi Abdulsalam. Statistical Analysis of Defective Artisanal Sand-Cast Aluminium Pots at PantekaTudunwada in Kaduna Metropolis, Nigeria. Afe Babalola University Ado-Ekiti Journal of Engineering Research and Development (AJERD), Volume 3, Issue 2, 2020 Available online at: http://ajerd.abuad.edu.ng
  65. Thomas N. Guma, John Simon Ajunwa, John Andamowei, & Adullateef Abdullaziz. Effects of Time-Aged Heat Treatments on the Hardness and Corrosion Resistances of some Sand-Cast Aluminum-Silicon-Iron Alloys. World Journal of Innovative Research (WJIR), Volume-9, Issue-4, October 2020. Available online at: http://www.wjir.org
  66. N. Guma & Victor A. Onoja. Determination of Optimal Metal Removal Rate in Dry Turning of AISI 1029 Steel with Carbide Insert Tool Using Taguchi Method. International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), Volume 9, Issue 11, November 2020. Available online at: http://www.ijirset.com
  67. N. Guma, Josiah Gana. Gloss Evaluation of Autobody Paint Finishes by Some Enterprises in Kaduna Metropolis, Nigeria. International Journal of Recent Engineering Science, 7(6), 1-9. Available online at: ijresonline.com/archive/ijres-v7i6p101.
  68. N. Guma. An Overview of Industrial Automation and its Implementation Approaches for Boosting Nigerian and other Developing Economies. Federal University Wukari Trends in Science & Technology Journal, Vol. 6, No. 1, April 2021. Available online at: http://www.ftstjournal.com

PUBLISHED JOURNAL PAPERS

PUBLICATIONS IN BOOKS OF CONFERENCE PROCEEDING

  1. Effect of Additives on the Characteristic Foundry Properties of Kaduna River Sand. Book of Proceedings, Vol 1, National Engineering Conference, Kaduna Polytechnic, 1998
  2. Methods of Improving the Lives and Quality of Hoes Used by Nigerian Farmers. Book of Proceedings, Vol 2, National Engineering Conference, Kaduna Polytechnic, 1999.

 

SERVICES TO NIGERIAN DEFENCE ACADEMY

  1. Faculty of Engineering Examination Officer 1994-1995
  2. Faculty of Engineering Time Table Officer 1997-1999
  3. Mechanical Engineering Departmental Time Table Officer, 1992-1994
  4. Mechanical Engineering Departmental Examination Officer, 1992-1994
  5. Invigilator NDA entrance examination at Lokojacentre in Kogi State, 1994.
  6. Faculty of Engineering Cadets Industrial Work Experience Scheme (CIWES) Coordinator, 2002-2004
  7. Member NDA Research Committee, 1994-2000
  8. Member NDA Consultancy Services, 2001-date
  9. Secretary NDA Consultancy Services 2011
  10. Secretary/Associate Editor, Academy Journal of Defence Studies, 2004-2012
  11. Member Faculty of Engineering Seminar Committee 2015-2016
  12. Faculty of Engineering Representative at the Academic Council 2015-2016
  13. Member NDA Quality Assurance Committee 2016 to date
  14. Faculty Time Table officer from November 2019 to date

Postgraduate and undergraduate courses at taught at different semesters and sessions at Nigerian Defence Academy, Kaduna.

  1. MEC 715: Advanced Automation and Control (M.Eng Production Engineeering)
  2. MEC 833: Manufacturing Automation (M.Eng Production Engineeering)
  3. MEC 861: Advanced Corrosion (M.Eng  Production Engineeering)
  4. MPM 712: Engineering Probability and Statistics (Masters in Professional Management-MPM)
  5. MEC 611: Engineering Mathematics (Postgraduate Diploma in Mechanical Engineering)
  6. MEC 634: Vibrations (Postgraduate Diploma in Mechanical Engineering)
  7. MEC 641: Automatic Control (Postgraduate Diploma in Mechanical Engineering)
  8. MEC 624: Statistical Methods (Postgraduate Diploma in Mechanical Engineering)
  9. MEC 410: Control Theory (Undergraduate)
  10. MEC 415: Machine Design (Undergraduate)
  11. MEC 421: Manufacturing Processes (Undergraduate)
  12. MEC 425: Engineering Materials Selection and Economics (Undergraduate)
  13. MEC 435: Advanced Machining Processes (Undergraduate)
  14. MEC 443: Introduction to Steel Making (Undergraduate)
  15. MEE 413: Strain Analysis and Measurements (Undergraduate)
  16. MEE 417: Mechanical Vibrations (Undergraduate)
  17. MEC 315: Strength of Materials (Undergraduate)
  18. MEC 324: Strength of Materials II (Undergraduate)
  19. MEE 317: Machine Tools (Undergraduate)
  20. ENG 311: Engineering Mathematics III (Undergraduate)
  21. ENG 312: Numerical Analysis (Undergraduate)
  22. ENG 321: Engineering Mathematics IV (Undergraduate)
  23. ENG 211: Engineering Mathematics I (Undergraduate)
  24. ENG 213: Linear Algebra (Undergraduate)
  25. ENG 221: Engineering Mathematics II (Undergraduate)
  26. ENG 225: Strength of Materials 1 (Undergraduate)
  27. MEE 211: Applied Mechanics (Undergraduate

STUDENT SUPERVISION

Research Students and Theses and projects successfully supervised as lead supervisor at Nigerian Defence Academy.

HIGHER DEGREES SUPERVISION

  1. Agbata Anthony. Design, Construction, and Testing of Mechanical Agitator for Car Body Paint Mixing, M.Eng Production Engineering, Septembers 2017.
  2. AbdullahiAbdulhakeemAbubakar NDA/PGS/FE/M/038/15: Physicochemical and Mechanical Properties of some Fibre Modified Kaduna Refinery Bitumen for Corrosion Coat-Protection of Carbon Steel, M.Eng Production Engineering, November, 2017.
  3. Ajayi Eunice Olukemi NDA/PGS/FE/M/1934/16: Effects of Normalizing and Tempering on Stress Corrosion Cracking of Modified AISI 4340 Steel in Acidic Chloride Media, M.Eng Production Engineering, August, 2020.

POST GRADUATE DIPLOMA (PGDME) SUPERVISION

  1. Ogboi Lilian Uche NDA/PGS/FE/PGDME/023/15: Sand Casting Design, Production and Testing of a 30-Litre Capacity Aluminium Pot Using Locally Available Materials in Kaduna, PGDME, January, 2018.
  2. Hamid Tukur, NDA/PGS/FE/PGDME/25/15 and Echoida Mohammed Hussein
  3. NDA/PGS/FE/PGDME/19/15.  Design and Construction of a Venturi Meter for Square Non-Circular Flow Channels, PGDME, July, 2018

UNDERGRADUATE SUPERVISION

  1. Deep Gun Hole Drilling on the Lathe. NDA/4306, Officer Cadet Hassan Tafida Gadam, August, 1992
  2. Analytical Design of a Slider Crank Mechanism as a Function Generator. NDA/4604, Officer Cadet Waidi A. Shaibu, July, 1993.
  3. Design of a Disc Cam Template for Non-circular Boring Attachment on the Lathe Machine. NDA/4688. Cadet Sergeant Abdul-Rasheed Bamidele Braimoh, August, 1993.
  4. Control Analysis of Air-fuel Ratio in an Automotive Engine. NDA/4527, Officer Cadet Shamsideen T. Shafaru, June, 1993.
  5. Stress Analysis of Adhesively Bonded Joints. NDA/4692, Cadet Sergeant Crispin Allison-Kulo, August, 1993.
  6. Gyroscopic Stabilization of Locally Made Canoes-Theoretical Perspective. NDA 1932/ Officer Cadet M. Mpi
  7. Design of a Solar Water Heater for Household Use. NDA/4724, Officer Cadet, Musa Gambo Abdullahi, July, 1994
  8. The Effects of Additives on the Characteristic Foundry Properties of Kaduna River Sand. NDA/4786 Officer Cadet Clement B.D. Waziri, June, 1994
  9. Analysis of Stability and Control of Guided Weapons. NDA/4839, Officer Cadet Abubakar Abdul Suleh, July 1994
  10. Design of a Missile Autopilot. NDA/4844, Officer Cadet John AyodejiLaoye, July, 1994.
  11. Dynamic Stability Analysis of a Military Vehicle in an Explosion Induced Vibrating Terrain. NDA/5006, Officer Cadet Chinedu Ralph Nnebeife, June, 1995.
  12. Methods of Improving the Lives of Simple Agricultural Implements Used by Nigerian Farmers. NDA/5025, Officer Cadet, Chukwuemeka Obijuru Ashiegbu, June 1995.
  13. Effects of Design Variations on the Performance of Locally Made Guns-A Case Study of Defence Industries Corporation of Nigeria (DICON). NDA/5026, Officer Cadet, GamboA. Mbaka, June 1995.
  14. A Case Study of Machining Bevel Gears on the Lathe. NDA/5238, Cadet Sergeant Chinonye Oparaworlu Amadi, June, 1996.
  15. Stress Analysis of Steel to Steel Wires Bonded with Epoxy Adhesives. NDA/5253, Officer Cadet Chidi Kalu Ukoha, June, 1996.
  16. The Design of a Bomblet to be carried in an Aircraft. NDA/5334, Officer Cadet, Dukup Bise Danzang, June, 1997.
  17. A Comprehensive Study of Factors Involved in the Design of Modern Riffles. NDA/5378, Officer Cadet Nkemakolam Mbaka, June, 1997.
  18. A Study of Methods of Alleviating Fatigue Failure in Flight Vehicle Structures. NDA/5705, Officer Cadet Igbani Umazi Agwu, June, 1999.
  19. Controlling Industrial Noise-A Case Study of Nigerian Breweries Kaduna. NDA/5682, Officer Cadet Paul Kulawe, June, 2000.
  20. Design of a Boiler Fluid Level Controller for Steam Power Plant. NDA/6005 Officer Cadet Yahaya Mani, June, 2001.
  21. Design Analysis of a Conveyor Belt for High Temperature Materials. NDA/6305, Cadet Sergeant Justice Oko Orji, July, 2003.
  22. A Comparative Study of Different Methods of Joining Aluminium and Mild Steel. NDA/7439, Officer Cadet Olatubosun A. Kalejaiye, February, 2008.
  23. Field Test Assessment of Corrosivity of River Kaduna to Mild Steel. NDA/7787, Copany Senior Under Officer, Chike Charles Oguchi, December, 2009.
  24. Feasibility of Cathodic Protection of the Engine and Transmission System of Some Military Vehicles from Corrosion. NDA/7942, Officer Cadet Abdullahi Baba Mohammed, December, 2010.
  25. A Suitability Study of Some Locally Available Corrosion Inhibitors for Nigerian Army Vehicles. NDA/8059, Officer Cadet Auwal Ibrahim, December, 2010.
  26. Tensile Properties of Low Carbon Steel Pack-Carburized with Okaba Coal. NDA/8364, Officer Cadet I.M. Ibrahim, June, 2012.
  27. Corrosion Properties of Low Carbon Steel Pack-Carburized with Okaba Coal. NDA/8451, Officer Cadet, M.A. Mohammed, June, 2012
  28. Assessment of Stress Corrosion Cracking Susceptibilities (SCC) of Some Stainless Steel in a River Harbour Mud Using Accelerated Test. NDA/8662, Officer Cadet HL Sambo, June, 2014.
  29. Corrosion Monitoring of Automobile Engines-A Case Study of Mercedes Benz 200 C-Class. NDA/8868, Officer Cadet Bashir Abdul-Azeez, June, 2014.
  30. Experimental Investigation of Suitable Anode Specifications for Cathodic Protection of Carbon Steel in Some Corrosive Soil Environment. NDA/9152, Officer Cadet Ahmed, Jamilu Tanimu, June, 2015.
  31. Effects of some Amine Treatments on Corrosion Inhibition of Mild Steel in Acidic Chloride Environments, NDA 9207, Officer Cadet J.O. Daniel (Navy), 64 RC, Burma Battalion, June, 1916.
  32. Effects of some Heat Treatments on Corrosion of Low and Medium Carbon Steel in Acidic Chloride Environments, NDA/9504 Officer Cadet, O. Olayiwola (Air Force), 64 RC, Abyssinia Battalion, June 2016.
  33. A Field Study of Outdoor Atmospheric Corrosion Rates of Mild Steel around Kaduna Metropolis,NDA, 7721, Officer Cadet James A. Abu (Army), Burma Battalion, June, 2017.
  34. Effects of Aloe Vera Extracts on Corrosion Inhibition of Mild Steel in some Muddy Ponds And Marshlands around River Kaduna NDA/9729 Officer Cadet EO Iseghohimhen (Army), Burma Battalion, June, 2016.
  35. Effects of Pure Garlic Extract Treatments on Corrosion inhibition of Mild Steel in some Muddy Ponds and Marshlands around River Kaduna, NDA9728Officer Cadet UAmanokhai (Army), Burma Battalion, June, 2016.
  36. Assessment of Akaline Food Environment Corrosion with some Menus at NDA Cadets’ Mess on the Tensile Strength of Aluminum 6063 Alloy, NDA 9643, Officer Cadet, Jahleel Alhamdu Durami, 66 Regular Combatant Course (Army), 66 RC, Abyssinia Batallion, June 2018
  37. Effect of Chloride Food Environment Corrosion on the Hardness of Cast Aluminum Cookware: A Case Study with some Menus Served at NDA Cadets Mess, NDA/10244, Officer CadetJibrilAliyu (Navy), 66 Regular Combatant Course, Mogadishu Battalion, June,2018.
  38. Effects of Acidic Food Environment Corrosion on Impact Strength of Aluminum 6061 Alloy: A Case Study with some Menus Served at NDA Cadets Mess NDA/10347, Officer Cadet Sabiu Abubakar Sukuntuni (Army), 66 Regular Combatant Course, Burma Battalion, June 2018
  39. A Study of Tensile Strengths of some Butt-Arc-Welded Medium Carbon Steel Joints, NDA/10550, Officer Cadet Christian Chiemezie Uzoaru, 67th Regular Combatant Course,(Navy), Dale tBattallion, June, 2019.
  40. Statistical Analysis of Defects in Sand Castings: A Case Study Of Artisanal-Cast Aluminum Potsin Kaduna Metroplis atPantekaTudunwada,NDA/ 10559,Officer Cadet Habeeb Alabi Abdulsalam, 67th Regular Combatant Course,(Airforce), Dalet Battallion, June, 2019.
  41. A Study of Corrosion Behaviours of some Metal inert Gas Butt-Welded Mild Steel Joints in Various Acidic Chloride Media, NDA/ 10655, Cadet Sgt Abdulkadir Ahmad, 67 Regular Combatant Course, Abyssinia Battallion, June, 2019.
  42. Analysis of Steel-Corrosive Species in Nigerian Defence Academy Soil At Afaka Campus Using X-Ray Fluorescence And Diffraction Techniques, NDA 10844 Officer Cadet Abdulsamad Abubakar, 67 Regular Combatant Course (Army) ,Burma Battalion, June, 2019.

Academic Branch

Contact us

  • Nigerian Defence Academy
    Kaduna, Kaduna State
    PMB 2109  Nigeria.
  • Map
  • enquries@nda.edu.ng

Social Networks

Copyright © 2021 Nigerian Defence Academy

Hit enter to search or ESC to close