1. BIO DATA
a. Surname - Agboola
b. Other Names - Oladipo Folounso
c. Sex - Male
d. Date of Birth - 25th April 1958
e. Place of Birth - Kaduna
f. Home Town - Osogbo
g. Local Govt Area - Osogbo
h. State of Origin - Osun
i. Nationality - Nigerian
j. Marital Status - Married
2. EDUCATIONAL INSTITUTIONS ATTENDED WITH DATES
a. St. Augustine’s Primary School, Kaduna - 1966-1972
b. Government College Katsina - 1973-1978
c. Moscow Institut6e of Steel and Alloys, Moscow,
USSR - 1980-1985
d. Moscow State Institute of Steel and Alloys
(Technological University) - 2001-2004
3. QUALIFICATIONS OBTAINED WITH DATES
a. First School Leaving Certificate - 1972
b. West African School Certificate (Division One) - 1978
c. M.Sc, Metallurgical Engineering - 1985
d. Ph.D, Metallurgical Engineering - 2004
4. THESES PRESENTED
a. O.F, Agboola, Design of a Basic Oxygen Furnance Steelmaking Section with an Annual Capacity of 5 Million Tones per Annum of Steel, M.Sc Thesis, Moscow Institute of Steel and Alloys, Moscow, USSR, 1985.
b. O.F, Agboola, The Study and Optimization of Non-Metallic Inclusions Type and Morphology in Micro-Alloyed Steels, Ph.D Thesis, Moscow State Institute of Steel and Alloys (Technological University), Russia, 2004.
5. WORKING EXPERIENCE WITH DATES
a. Assistant Lecturer, Nigerian Defence Academy,
Kaduna - 1987-1988
b. Lecturer II, Nigerian Defence Academy, Kaduna - 1988-1998
c. Lecturer I, Nigerian Defence Academy, Kaduna - 1998-2005
d. Senior Lecturer, Nigerian Defence Academy, Kaduna 2005-2011
e. Associate Professor Nigerian Defence Academy,
Kaduna 2011 to date
ADMINISTRATIVE EXPERIENCE/COMMITTEE MEMBERSHIP
a. Dean, Faculty of Engineering, NDA 2013 to date.
b. Head, Department of Mechanical Engineering, NDA 2011 to 2013.
c. Head, Department of Mechanical Engineering, NDA 2006 to 2008.
d. Member, Academic Board, NDA 2005 to 2008.
2011 to date
e. Member, Academy Appointment and Promotion
Committee 2006 - 2008.
f. Member, Academy Research Monitoring Committee 2004 to 2006.
g. Member, Academy Consultancy Unit 1996 to 2001.
h. Member, Academy Library Committee 2005 to 2006.
i. Member, Academy Consultative Committee 1999 to 2001.
j. Member, Committee on the Establishment of Center of Excellence for Defence Studies and Documentation 2005.
k. Member, Academy Accreditation Committee 2007.
l. Chairman, Department of ME Appraisal and Promotion Cttee 2006 to 2008.
m. Chairman, Committee on the Establishment of ME Dept PG Program 2008.
n. Member, Academy Convocation Committee 2010-2014.
o. Coordinator, Departmental PG Programme 2010 to 2011.
p. Member, Academy Senior Staff Disciplinary Committee 2010 to date.
q. Member, Academy Appointment and Promotion Cttee 2006 to 2006.
r. Chairman, Committee on the Review of Draft Code of Conduct for Civilian Staff of NDA 2014.
a. Resource Person, COREN Accreditation Visitation Team to the Federal University of Technology, Owerri, Imo State, Sept 2014.
b. Member, Committee of Dean of Engineering and Technology of Nigerian Universities (CODET).
c. External Moderator to Air Force Institute of Technology (AFIT); Dept of Mechanical Aerospace Ground Engineering (2014-2016).
d. External Examiner, Department of Mechanical Engineering, Kaduna Polytechnic, Kaduna 2007 to 2009.
e. Editorial Board Member, Mechanical Engineering Journal (Published by The Nigerian Institution of Mechanical Engineers) 2009.
f. External Examiner, PG Diploma Project Defence, Air Force Institute of Technology (AFIT), Kaduna 2010.
g. Member, Investment Committee, The Nigerian Institution of Mechanical Engineers, Kaduna Branch. 2009.
h. External Assesor to the following Journals:
(i) Academy Journal of Defence Studies, NDA, 2007 to date.
(ii) Academy Journal of Science and Engineering, NDA, 2007 to date.
(iii) Journal of Engineering Technology and Industrial Application, Kaduna Polytechnic 2006 to date.
(iv) Journal of Engineering and Technology (JET), Bayero University, Kano. 2008 to date.
a. Agboola, O.F. (2004). “Investigation and Optimization of the nature and morphology of non-metallic inclusions in High Strength Low alloy Streels, Moscow. (Monograph, Publication in Russian Language).
b. Agboola, O.F., Dub, A.V. et.al., (2004), “Non-metallic inclusions in Micro alloyed steels”. Journal of Electric Steelmaking, MISIS, Moscow, No 11, Pp. 36-43. (Publication in Russian Language).
c. Agboola, O.F. (2005). “Ladle Treatment of Mild Steel for Automobile Panel”. Spectrum Journal, Vol. 10, Nos 1&2, Pp. 198-204.
d. Agboola, O.F. (2005). “The effect of process techniques on the Mechanical properties of V-Ni High Strength Low alloy Pipeline steels. “The Academy Journal of Defence Studies, Vol. II, Pg. 143-151.
e. Agboola, O.F. (2006). “Non-metallic inclusions in calcium treated deoxidized steels”. Academy Journal of Science and Engineering, Vol. 4, No 1, Pp. 97-104.
f. Agboola, O.F. (2009). “Characterization of non-metallic inclusions in hot rolled calcium treated steel”. Academy Journal of Science and Engineering, Vol. 6, No 1, Pp. 60-66.
g. Agboola, O.F. (2009). “The effects of calcium treatment on the size and number of inclusions in steel”. Journal of Engineering and Technology (BUK), Vol. 4, No 2, Pp. 91-96.
h. Agboola, O.F. (2009). “Characterization of non-metallic inclusions with complex structures in microalloyed steel”. Journal of Engineering Science and Application (AAU), Vol. 6, No 1&2, Pp. 59-64.
i. Agboola, O.F. (2010). “The role non-metallic inclusions in steel failure”. American-Eurasian Journal of Scientific Research, Vol. 5, No 2, Pp. 130-133.
j. Agboola, O.F. (2010). “Non-Metallic Inclusions and their Effects on Steel Properties”, Pyla-Mak Services Ltd., Kaduna.
k. Garba. D.K., Alhaji, A.U., Agboola, O.F. (2013). “Determination of Suitable Locally Produced Steel in Nigeria as a Base Material for the Production of High Impact Resisting Panel Material”. Global Journal of Engineering, Design and Technology, Vol. 2, No 4, Pp. 67-71.
l. Akindapo, J.O., Oyinlola, A.K., Agboola, O.F. (2013). “Mechanical Properties of Polymer Matrix Composites Developed from Fibre Glass (E-Class) and Bisphenol-A-Co-Epichlorohydrine”, International Journal of Engineering Research and Technology, Vol. 2, Issue 12, Pp. 353-364.
m. Akindapo, J.O., Oyinlola, A.K., Agboola, O.F., Yakubu, M.K. (2013). Impact Strength and Toughness Properties of Polymer Matric Composites Developed from Fibre Glass/3-D Cotton Fibre and Epoxy Resin”. Academy Journal of Science and Engineering, Vol. 7, No 1, Pp. 43-54.
n. Garba, D.K., Alhaji, A.U., Agboola, O.F. (2014). Development of High Impact Resisting Material using Nigerian Steel 65 Mn Steel as a Base Material”. Global Journal of Engineering, Design and Technology, Vol. 3, No 1, Pp. 38-42.
SEMINARS/CONFERENCES/WORKSHOPS ATTENDED AND PAPERS PRESENTED (IF ANY)
a. Nigerian Society of Engineers, Seminar on Cement and Allied Construction Materials, Lagos, (Participant) 1987.
b. Science Teachers Association of Nigeria (STAN), Annual Conference, Minna, (Participant) 1988.
c. Chemical Society of Nigeria, Annual Conference, Zaria, (Participant) 1990.
d. Faculty of Science Seminar Series, NDA, Kaduna. Paper Presented: Ladle Treatment of Mild Steel Automobile Panel, 1993.
e. Faculty of Science Seminar Series, NDA, Kaduna. Paper Presented: Preliminary Studies on Electric Arc Furnace for Block Making, 1996.
f. Nigeria Metallurgy Society, Annual Conference, Jos. Paper Presented: Ladle Treatment of Mild Steel Automobile Panel, 2000.
g. 2nd International Science Conference, Moscow. Paper Presented: Non-Metallic Inclusions in HSLA Steel, 2002.
h. International Workshop on Vacuum Treatment of Steel, Moscow. (Participant) 2004.
i. 1st International Conference on Operations Research, NDA, Kaduna. (Participant) 2006.
j. International Workshop on e-Library, Kaduna State University, (Participant) 2007.
k. Workshop on Auto-CAD Application, NDA, Kaduna. (Participant) 2008.
l. National Discourse on Nigeria in Global Peace Support Operations, NDA, Kaduna. (Participant) 2009.
m. Nigerian Society of Engineers, International Engineering Conference and AGM, Abuja, (Participant) 2010.
n. Workshop on institutions, Organizational Culture and Service Delivery, NDA, Kaduna. (Participant) 2011.
o. Nigerian Air Force R&D Workshop, Abuja. (Participant), 2011.
p. Association of Iron and Steel Conference, World Congress Center, Atlanta, Georgia, USA. (Participant), 2012.